BIOCHAR APPLICATIONS / GAS FILTRATION
Targeted filtration. Less odour.
Biochar as an odour filter medium
Explore how to match biochar to an odour problem in wastewater treatment or farm operations.
THE APPLICATION AT A GLANCE
Match the filter to the odour.
Odours come from many different compounds. Biochar’s tiny pores provide a large internal surface, while its surface chemistry determines which substances it attracts, binds or repels.
Identify the compounds first. The right filter medium depends on the specific gases causing the odour. During pyrolysis, the size, number and distribution of pores can be adjusted to suit particular applications.
Match the surface chemistry. Loading biochar with certain metals can change or reverse its surface charge and alter what it binds. Some biomass feedstocks also yield biochars with naturally suitable properties.
Use in wastewater treatment and on farms. Biochar is used to help control odours from ammonium compounds and some volatile hydrocarbons in sewage treatment plants and in farm manure and slurry management.
Plan for saturated media. As with liquid filtration, co-composting or re-pyrolysis may be options for spent biochar, depending on what it has captured. Re-pyrolysis can break down some organic contaminants. Metals require separate assessment.
01 / PORE STRUCTURE
Internal Surface Area
Fine pores provide surfaces where certain odour compounds can bind.
02 / SURFACE CHEMISTRY
Selective Binding
Surface charge and feedstock affect which compounds the medium captures.
03 / END OF USE
Spent Media Management
Choose a treatment route based on the contaminants captured by the filter.
EXPLORE YOUR OWN SCENARIO
What would it mean for your land?
Use the calculator to estimate biochar quantity and material cost.
ODOUR CONTROL CALCULATOR
What to do
Please select the Biochar Type you want to use.
Enter the estimated maximum gas flow.
Enter the number of scrubber chambers.
Then click on the ‘Calculate’ button.
BEFORE YOU APPLY
Define the problem. Then test the medium.
Use the estimate to scope the project. Verify suitability under actual operating conditions.
Characterise the odour and gas stream so you can select a biochar with suitable pore structure and surface chemistry.
Confirm the flow each chamber handles and the expected contamination levels. Test whether the proposed medium meets the required performance and how quickly it saturates.
Characterise captured contaminants before deciding whether co-composting or re-pyrolysis is suitable. Assess metal content separately when the filter has captured metals or uses a metal-loaded biochar.
LOOKING AT THE WHOLE PICTURE
Have biomass of your own?
The production calculator explores how much biochar you could make from your available resources.